EasyManua.ls Logo

JUKI AMS-210EN Series - Safety Device and Label Details; Visual Safety Device Explanations; Warning Label Identification; Compliance and Manufacturer Information

JUKI AMS-210EN Series
3 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
viii
In addition, be aware that the safety devices such as the "eye protection cover" and
"ngerguard"aresometimesomittedinthesketches,illustrationsandguresin-
cluded in the Instruction Manual for the explanation's sake. In the practical use, never
remove those safety devices.
CAUTION
Safety devices and warning labels(AMS-210ENHL2210/TF10S)
Thread take-up lever cover
This is a cover for prevent-
ing contact between the
human body and the thread
take-up lever.
Electrical-shock danger label
(EU
type)
(Refer to
"Electri-
cal-shock
danger
label" on
page i.)
In order to protect against
electrical shock, safety
precautions to be taken to
avoid danger are written
on this label.
Load-center label
This label indicates
the center of gravi-
ty of the machine.
Finger guard
This is a cover for pre-
venting contact between
ngersandtheneedle.
Eye protection cover
This is a cover for protect-
ing eyes from being in-
jured by a broken needle.
Warning label against
pinching
This label warns
thatngersor
other parts of
human body can
be pinched in the
thread take-up lever.
(Only for the sewing
machine provided
with a slide thread
take-up lever)
Warning label against pinching
The purpose of this label is to warn
the operator to be careful to prevent
pinching of the human body in the
presser foot and related parts. (Ad-
hered on the top face of the feeding
frame)
Watch-your-head label
This label indicates that there is a
risk of contact between the sew-
ing machine and the head. (This
label is put on the bottom surface
of the throat plate auxiliary cover.)
Power switch
This switch is used for
disconnecting the power
unit of the sewing ma
-
chine from the power sup-
ply. It is also used as the
emergency stop switch.
ix
Warning label against
pinching
This label warns that
there is a risk of injury
tongersifbeing
pinched in the knife.
Motor cover
This is a cover for prevent-
ing contact between the
motor, gear, fan and pulley
and the human body.
Warning label against
pinching
This label indicates
that there is a risk
of pinching hands
between the sewing
machine and the feed
mechanism. (One each
on the right and left)
Warning label against
pinching
This label indicates
that there is a risk
of contact between
ngersandtheneedle
and intermediate
presser.
Warning label against
pinching
This label indicates that
there is a risk of pinch-
ing hands between the
sewing machine and
the feed mechanism.
Warning label against
pinching
This label warns that
hands can be pinched
under the sewing ma-
chine.
Warning label against
pinching
This label warn that
there is a risk of
pinchingofngers
under the feed roller.
Warning label against
pinching
This label warns
that there is a risk of
pinchingofngers
in the cylinder.
Warning label against
pinching
This label warns
that there is a risk of
pinching in the tape
travel guide.
Warning label
(Refer
to the
warning
label on
page i.)
The label gives the
minimum precau-
tions to be taken
when operating the
sewing machine.
x
ENGLISH
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
We hereby declare that the sewing machine (sewing head) described below ;
1. Must not be put into service until the machinery to which it is incorporated has been declared in
conformity with provisions of the Machinery Directive 2006/42/EC,and
2. Conforms to the essential requirements of the Machinery Directive 2006/42/EC, described in the
technical documentation,and
3. To be prepared with above technical documentation compiled in accordance with part B of Annex
VII,and
4. Also to conform to the RoHS Directive 2011/65/EU
5. Relevant information on which should be transmitted in response to a reasoned request by the
national authorities,by the electronic method or other according to the request.
Applied harmonized standards, in particular :
EN ISO12100, EN ISO10821, EN 50581
Manufacturer :
JUKI CORPORATION
2-11-1, Tsurumaki, Tama-shi, Tokyo, Japan
Model
Description Industrial Sewing Machine
Function make stitches and sew
AMS-210EN Series
Please do not hesitate to contact our distributors or agents in your area for further information when necessary.
*
Thedescriptioncoveredinthis"FORTHEUSEOFMACHINE"issubjecttochangefor
improvementofthecommoditywithoutnotice.
Copyright © 2017 JUKI CORPORATION
All rights reserved throughout the world.
17 · 11 Printed in Japan
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO, 206-8551, JAPAN
PHONE : (81)42-357-2371
FAX : (81)42-357-2274
http://www.juki.com
x
ixviii

Other manuals for JUKI AMS-210EN Series

Related product manuals