Need help?Do you have a question about the JUKI mo-2516n and is the answer not in the manual?
General| Type | Overlock |
|---|---|
| Number of Needles | 2 |
| Differential Feed Ratio | 0.7-2.0 |
| Max. Sewing Speed | 1500 stitches/min |
| Stitch Length | 1-4 mm |
| Needle Size | 75/11 |
| Thread Tension | Manual |
| Number of Threads | 4 |
Describes different levels of danger and their corresponding warning symbols used in the manual.
Outlines fundamental safety measures and precautions for using the machine safely.
Provides safety guidelines for different stages like transport, unpacking, and installation.
Covers safety for operation, cables, grounding, motor, lubrication, and maintenance.
Details the machine's intended use, sewing speed, and related specifications.
Lists technical specifications such as buttonhole length, needles, and presser lift.
Instructions on how to install the motor pulley and V belt for machine operation.
Steps for attaching the flat belt, belt covers, and thread stand assembly.
Guide for installing the motor and the main sewing machine head onto the base.
Instructions for correctly installing the needle and handling the bobbin case.
Procedures for winding the bobbin and placing it into the bobbin case.
Step-by-step guide on how to thread the needle with the upper thread.
Essential checks to perform before starting the sewing machine.
Adjusting sewing speed, emergency stop, and understanding stitch types.
Guidance on adjusting upper and lower thread tension for proper stitching.
Instructions for adjusting buttonhole length, width, and knife settings.
Adjusting presser bar pressure and the relation between needle and hook.
Adjusting thread release timing and bobbin presser unit.
Procedures for adjusting thread trimmers and the bobbin thread winder.
Identifies common stitching issues and provides remedies.
Addresses issues unrelated to stitching, like machine operation and lubrication.
To Next Page
