Need help?Do you have a question about the JUKI MO-2500 and is the answer not in the manual?
General| Type | Overlock Sewing Machine |
|---|---|
| Number of Threads | 2/3/4 |
| Differential Feed | Yes |
| Differential Feed Ratio | 0.7 - 2.0 |
| Needle Type | DB x 1 |
| Needle Quantity | 2 |
| Max. sewing speed | 1, 500 stitches/min |
| Overedging width | 5 mm |
| Stitch Width | 5 mm |
Calibrating thread tension using the tension controller dial and gears.
Fine-tuning the needle threader hook for efficient thread pickup.
Identifies causes and solutions for needle thread breaking.
Diagnoses and corrects issues causing looper thread breakage.
Troubleshooting guide for broken needles, covering common causes.
Addresses problems related to the needle point being crushed.
Solutions for stitch skipping issues related to the needle thread.
Troubleshooting guide for inconsistent material feeding during sewing.
Identifies causes and remedies for fabric puckering.
Troubleshooting steps for skipped stitches caused by the lower looper.
Solutions for stitch skipping related to the upper looper thread.
Addresses issues with the chain-off thread mechanism.
Solutions for overlocking needle thread being too loose.
Troubleshooting guide for general irregular stitch formation.
Remedies for excessive looper thread, causing bulging.
Addresses problems with the looper thread's bite or catch.
Correcting incorrect knotting positions of the upper and lower looper threads.
To Next Page
