ENGLISH
27
TECHNICAL DATA
Voltage 3.6 V
Battery type 1.3 Ah, Li-Ion
Charging time 4 hours
Cutting width 80 mm
Cutting length 110 mm
Speed 1000 rpm
Weight 0.6 kg
1.0 kg with handle
Measured sound power level, LwA 86.4 dB(A)
Guaranteed sound power level, LwA 90 dB(A)
Sound pressure level, LpA 74.6 dB(A), K=3 dB
Max. vibration level 1.63 m/s2, K=1.5 m/s2
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING! The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
Multi trimmer
1. Safety switch
2. Battery indicator
3. Power switch
4. Charging indicator
5. Socket
6. Protective cover
OPERATION
Charging
The trimmer cannot be started while the battery is charging. It takes about 4 hours to charge the battery.
1. Connect the charger to the trimmer.
2. Connect the charger to the mains supply. The charging indicator on the trimmer turns red.
3. When the charging indicator turns green the battery is fully charged.
For best charging results, the battery's ambient temperature should be 18-24C. Do not charge the
battery at temperatures below +4°C or above 40°C.
To Next Page
Loading...
