4) Area Code Setting：
After pressing DIAL key to enter the main menu, press the UP key for 3 times until the display
shows “Area Code”, press DIAL key to confirm and enter the Area Code Menu Setting. The LCD
will display “Area Code”, press UP/DOWN keys to select the first digit of the local area code and
press the DIAL key to confirm and skip to the next digit. After finishing the setting, press DIAL key
to confirm and return to the “Set Voice”. Press UP/DOWN to choose other menu settings or choose
“Exit Options” then press DIAL key to exit.
Note: You must set the area code 3 digits to the area code of the line the caller ID box is
connected to. E.g., If your phone number is 480-759-2255 your area code must be set to 480
Note: All 3 digits local area codes must be set from left to the right;
5) Voice Setting for white-list numbers.
After pressing DIAL key to enter the main menu, press the UP button 4 times, the LCD will display:
"Set Voice”, press the DIAL button to confirm and enter the Voice Setting. The LCD will display:
"Set Voice 0", press UP/DOWN key to select 0-5, “0” means turn off talking numbers/names, and
this unit will keep silence whenever calls come in and if you’re looking over the white- list or call
records. 1-5 means the times of talking the names when you receiving the incoming calls. After the
setting done, press DIAL key to confirm and return to the ‘Set Time and Date setting’ Press
UP/DOWN to choose other menu settings or choose “Exit Options” then press DIAL key to exit.
Please note: This will only work for the numbers with a name recording in the white-list, if there’s a
number in the white-list without giving a name, then it will talk this number only one time when the
call comes in.
6）Date and Time Setting：
After pressing DIAL key to enter the main menu, press the UP key 5 times, the LCD will display:
"Set Time/Date", press the DIAL button to confirm and enter the date and time setting, the LCD will
display: "TIME/DATE", hour is flashing, press the UP/DOWN button to select the hour, press DIAL
key to confirm and enter the minute setting. The adjustment sequence is hours, minutes, month and
day. After finishing the setting, press DIAL key to confirm and return to the “SET BACKLIGHT” Press
UP/DOWN to choose other menu settings or choose “Exit Options” then press DIAL key to exit.
Note: The time and date will automatically set up itself on the first incoming call.
7) Back light Setting:
After pressing DIAL key to enter the main menu, press the UP key 6 times, the LCD will display:
"Set Backlight", press DIAL key to enter and then press UP/DOWN key to choose ON or OFF to turn
To Next Page
Loading...
Need help?
General