Jumbo HOBBY - Page 2

1. CONDITIONS / DISCLAIMER
JUMBO Stillads does not assume any responsability for this material or for the application of this material in case of special
use. JUMBO Stillads cannot be held responsible for error in the assembly instructions or for direct or indirect losses caused
by delivery, presentation or use of this material.
The content may not in part or in total be photocopied, reproduced or translated, without permission from JUMBO Stillads.
JUMBO Stillads disclaims any liability relating to compensation to victims who have inadvertently breached safety rules in this
assembly manual.
2. WARRANTY
There is 1 year warranty on JUMBO HOBBY Scaffolding. JUMBO Scaffolding disclaims liability for wear and breaks on the
scaffold tower components, caused by neglect or misuse. Guarantee does not apply to normal wear and tear on the parts.
The lifetime of the scaffold is estimated at min. 1 year (according to the warranty)
NOTE: Use of unauthorized parts in your JUMBO scaffolding voids the warranty, liability and approval.
3. USE AND FUNCTION
This type of scaffold is designed to be loaded with max. 200 kg.
JUMBO HOBBY Scaffold is intended for use where there is a need for safe and easy access to a task at a given height. The
scaffold is weatherproof, but it is recommended to store the scaffolding indoors when not in use. In general, aluminum scaffold-
ing should avoid contact with untreated iron constructions and with iron particles, as they can work their way into aluminum.
When working outdoors the scaffold should never be used at a windforce
exceeding 12,5 m/sec. In order to secure the scaffold from being blown
over, or when not in use, it is recommended to move it to a sheltered place..
REMEMBER: Control the scaffold before use: Are the brakes on the castors
actived and is the scaffold mounted as indicated in these instructions.
JUMBO HOBBY Scaffolding consists in its simplicity of a few modular sections and can be expanded in accordance with the
following instructions.
3.1 Security
NOTE: Lifeline/fall-arrestsystem must NOT be fastened on JUMBO HOBBY Scaffolds.
When installing at respectively 3.61 and 5.57 meters it is recommended
to use two people to assemble a JUMBO HOBBY Scaffolding
The platforms must be secured with the storm lock to prevent accidental
separation (A). All castors must be locked by pressing the pedal down
(B). All braces (horizontal & diagonal) are provided with self-locking claws
(C).
3.2 Ergonomics
Ensure that the workplace and the access thereto is cleared, well-lit and not slippery. Lift as far as possible with your legs w
/ back straight and avoid twisting and turning during the lift. Be sure to plan the work and site conguration in relation to the
burden, as far as possible use the lightest components of scaffolding. Plan breaks during particularly heavy burdens, so mus-
cles and joints can be relieved, and use suitable technical aids (eg, hoists and lifts) to reduce the burden.
3.3 Maintenance
JUMBO HOBBY scaffolding does not usually require maintenance. Do not use hammer or alikes to free the scaffolds from
mortar.
Do not use oil product! to lubricate claws, storm blocks and castors - use a PTFE-spray
A
B
C
!