Instruction manual
76 11/2019
Compressor
doesn’t work
Overheat protection starts.
Wait for 3 minutes until the
temperature is lowered, and then
restart the machine.
The remote
control does
not work.
The distance between the
machine and the remote
control is too far.
Let the remote control get close to
the air conditioning, and make sure
that the remote control directly
faces to the direction of the remote
control receiver.
The remote control is not
aligned with the direction
of the remote control
receiver.
Batteries are dead. Replace batteries.
Displays 'E1'
sensor is abnormal.
Check the pipe temperature sensor
and related circuitry.
Displays 'E2'
sensor is abnormal.
Check the room temperature sensor
and related circuitry.
If problems not listed in the table occur or recommended solutions do
not work, please contact the professional service organization.
To Next Page
Loading...
