Jump Power Elite JP01-R01-144S User Manual

JUMP POWER 12x8FT ELITE SERIES
RECTANGULAR TRAMPOLINE&ENCLOSURE
INSTRUCTION MANUAL
Model: JP01-R01-144S
Smyths Toys item number: 182698
Smyths Toys HQ UC / Smyths Toys EU HQ Ltd
Lyrr Building 1, Mervue Business Park, Galway, Rep of Ireland, H91K4HV.
 YOU MUST THOROUGHLY READ AND UNDERSTAND THE INSTRUCTIONS IN THIS
MANUAL BEFORE ASSEMBLING AND USING THIS TRAMPOLINE.
 SAVE THIS MANUAL FOR FUTURE REFERENCE.
 MAXIMUM WEIGHT OF USER MUST NOT EXCEED 100KG.
 DO NOT ALLOW MORE THAN ONE PERSON ON THE TRAMPOLINE AT A TIME.
 DO NOT ALLOW YOUNG CHILDREN TO USE UNLESS SUPERVISED BY AN ADULT.
 THE ENCLOSURE FORMS PART OF THE STRUCTURAL INTEGRITY OF THE
TRAMPOLINE.
THE TRAMPOLINE MUST NOT BE USED WITHOUT THE ENCLOSURE ASSEMBLED.
 FOR OUTDOOR DOMESTIC USE ONLY.
WARNING!
Lymedale Business Park, Newcastle under Lyme, UK, ST5 9QH

Jump Power Elite JP01-R01-144S Specifications

General

Model	JP01-R01-144S
Category	Accessories
Type	Jump Starter
Battery Capacity	14400mAh
Output Voltage	12V
USB Output	5V/2.1A
LED Flashlight	Yes
USB Ports	2

Summary

General Safety Warnings

User Weight and Usage Limits

Maximum user weight must not exceed 100kg, and only one person on the trampoline at a time.

Enclosure Safety Requirements

The enclosure forms part of the structural integrity and must be used.

Trampoline Assembly and Moving Guidelines

Critical Safety Precautions

Age, Supervision, and Activity Limits

Not suitable for children under 36 months; adult supervision required; no somersaults.

Usage and Environmental Warnings

Warnings on wet mats, empty pockets, jumping in the middle, and strong winds.

Assembly Instructions and Usage

Maintenance of Trampoline Components

Enclosure Net Maintenance Schedule

Schedule for inspecting and replacing enclosure netting due to wear.

Trampoline Assembly - Frame

Step 1: Frame Tube Layout

Trampoline Assembly - Legs

Step 2: Leg Extension Assembly

Trampoline Assembly - Bases

Step 3: Leg Base Attachment

Trampoline Assembly - Corners

Step 4: Corner Frame Assembly

Trampoline Assembly - Springs

Step 5: Spring Installation

Install 60 springs on opposite sides of the mat in an alternating manner.

Trampoline Assembly - Pad

Step 7: Frame Pad Installation

Trampoline Assembly - Enclosure Poles

Step 8: Enclosure Pole Attachment

Attach the enclosure poles to the trampoline frame, ensuring correct fit.

Trampoline Assembly - Top Tubes

Step 9: Top Tube Layout

Trampoline Assembly - Top Tube Assembly

Step 10-1: Top Tube Assembly (Part 1)

Trampoline Assembly - Top Tube Connection

Step 11: Connecting Top Tubes

Connect the top tubes to the enclosure poles, ensuring a secure fit.

Trampoline Assembly - Top Tube Details

Step 11 (Continued): Top Tube Connection Details

Further details on connecting top tubes to enclosure poles, showing specific actions.

Trampoline Assembly - Securing Top Tubes

Step 12: Securing Top Tubes

Trampoline Assembly - Final Top Tube Attachment

Step 13: Final Top Tube Attachment

Trampoline Assembly - Enclosure to Frame

Step 14: Enclosure Pole Attachment to Frame

Attach the enclosure poles to the main trampoline frame.

Trampoline Assembly - Netting

Step 15: Enclosure Netting Attachment

Attach the enclosure netting to the poles and frame, ensuring proper fit.