The Jumper Medical JPD-ES100 is an electrostimulator designed for therapeutic use, featuring a compact design and smart connectivity. It comes with two sizes of electrodes, a microUSB charging cable, and a manual.
Function Description:
The JPD-ES100 functions as an electrostimulator, delivering electrical impulses to specific areas of the body for therapeutic purposes. It offers various treatment methods, which can be selected and switched using a single control button on the device. The device is designed to be user-friendly, with a straightforward operation process. It can operate independently or in conjunction with a mobile application, JumperHealth, which enhances its functionality by allowing users to track treatment history and adjust certain parameters.
Important Technical Specifications:
- Charging: The device is recharged via a supplied microUSB cable, connecting to a standard charger.
- Connectivity: It connects to a mobile phone via Bluetooth, enabling interaction with the JumperHealth application.
- Treatment Duration (Standalone): When used without the mobile app, the treatment duration is fixed at 15 minutes.
- Electrode Attachment: Electrodes are attached to the electrostimulator using magnets on the lower part of both sections of the device.
- Indicator Diode: The device features a diode that indicates its status:
- Green: Device is charged and in operation.
- Flashing Green: Device is about to turn off.
- Flashing Orange: Low battery capacity or electrodes are not properly attached to the body.
- Orange: Device is charging.
Usage Features:
- Preparation: Before use, remove the protective foil from the electrodes.
- Electrode Placement: Place the electrodes on the desired area of the body. The manual advises choosing electrode size based on the treatment area.
- Power On: Turn on the electrostimulator using the single control button located on one of its parts. This button also serves for switching off the device and cycling through different treatment methods.
- Mobile App Connection (Optional):
- Turn on the electrostimulator.
- Launch the JumperHealth application on your mobile phone.
- Initiate a measurement within the app. The device will automatically connect to your phone via Bluetooth.
- The "History" tab in the app allows you to view past treatment records.
- Treatment Duration: While the device functions without the app, connecting to JumperHealth allows you to set the treatment duration, although the default is 15 minutes. The app also displays the currently selected treatment method.
- Intensity Adjustment: The treatment intensity is initially set to the mildest level. Users are strongly advised to increase intensity cautiously, adding another degree only after confirming that the current intensity is too weak. If the treatment method is changed during a session, the intensity automatically resets to the lowest value.
- Automatic Shutdown: The device automatically switches off after a treatment session is completed.
Maintenance Features:
- Cleaning: The device should be cleaned with a gently damp cloth. It should not be submerged in water.
- Damage Inspection: Do not use the device if it shows any signs of damage.
- Storage: Avoid leaving the device in direct sunlight.
- Electrode Care: After each use, place the protective film back on the electrodes to preserve them.
Disposal:
The JPD-ES100 contains batteries and/or recyclable electrical waste. To protect the environment, the product should not be disposed of with ordinary household waste. Instead, it should be handed over for recycling at a designated collection point for electrical waste.
The importer, Satomar s.r.o (Karlova 37, 614 00 Brno), declares that the product complies with all essential requirements of applicable EU directives. The full text of the Declaration of Conformity is available for download on http://www.satomar.cz. Copyright © 2021 Satomar, s. r. o. All rights reserved. Appearance and specifications are subject to change without prior notice, and print errors are reserved. The most up-to-date version of the manual can always be found at www.mobilnipodpora.cz.
To Next Page
Need help?
General
