What to do if my Jumper JPD-ES200 experiences power failure?
If your Jumper Medical Equipment experiences power failure, it is likely due to an electricity shortage. Replace the battery before using the equipment.
What to do if my Jumper JPD-ES200 Medical Equipment is unable to boot?
If your Jumper Medical Equipment is unable to boot, the cause may be a severe electricity shortage. The suggested solution is to replace the battery.
What to do if my Jumper JPD-ES200 Medical Equipment suddenly pauses treatment and alarms?
If your Jumper Medical Equipment suddenly pauses treatment and alarms, it may be due to the fall-off of an electrode pad. Re-attach the electrode pads on the treatment sites.
Why is there inconsistent strength between electrode pads on my Jumper Medical Equipment?
Inconsistent strength between electrode pads on your Jumper Medical Equipment may be caused by a disconnected main unit, electrode wires, or electrodes. Ensure the connection among the main unit and electrodes is secure.
What to do if electrode pads fall off when using Jumper JPD-ES200 Medical Equipment?
If the electrode pad falls off when using Jumper Medical Equipment, this could be due to sweat on the skin or ineffective stickiness of the pad. Wipe the sweat on the skin and re-attach the electrode pad.
Why do I sense a piercing pain when using Jumper JPD-ES200?
If you experience a piercing pain while using Jumper Medical Equipment, it could be that the electrode pad is not stuck tightly. Try sticking the electrode pad again. If the issue persists, replace the electrode pad.
Visual representation of the TENS therapy device and its controls.
Details the front and right side views of the device's main unit.
Lists the essential accessories provided with the TENS therapy device.
Itemizes all components included in the product's packaging.
Explains the main components that make up the TENS therapy device.
Defines the device's purpose and the conditions it can address.
Lists the key characteristics and capabilities of the TENS therapy device.
Guides the user on how to correctly attach the device and electrode pads.
Explains buzzer sounds and low battery alerts for device status.
Provides instructions for cleaning the main unit and electrode pads.
Lists conditions and individuals for whom the device use is prohibited.
Offers solutions for common issues encountered while using the device.
Specifies recommended ambient conditions for device operation and storage.
Lists the detailed technical specifications of the TENS therapy device.
Explains the meaning of various symbols used on the device and in the manual.
Details the device's compliance with electromagnetic emission standards.
Details the device's immunity to electromagnetic interference.
General| Type | Fetal Doppler |
|---|---|
| Ultrasound Frequency | 2.5 MHz |
| FHR Measuring Range | 50 - 210 BPM |
| Display | LCD |
| Battery | 2 x AA batteries |
| Automatic Shut-off | Yes, after 1 minute of inactivity |
To Next Page
