17
STEP 7 : ATTACHING THE BOTTOM OF THE NET
You will need the following parts to complete step 7:
8 x Cords
- Part 17.
.
Tie one end of the cord around a V-ring on the bed
of the trampoline. Push the outer end through a
hole in the bottom of the netting. Sew in and out
using every V-ring and hole in the netting nearest
to that V-ring.
Important: Keep the cord tight at all times.
Continue to do this until all the net is sewn in,
tying off the rope and starting the next when it has
come to the end.
From the underside of the trampoline, tie the
remaining elastic straps around the springs or
through the V-Rings.
You have completed step 7 and the trampoline is
fully assembled.
To Next Page
Loading...
