To Next PageTo Next Page
Need help?Do you have a question about the Jumpking Oval POD and is the answer not in the manual?
General| Brand | Jumpking |
|---|---|
| Model | Oval POD |
| Category | Sports & Outdoors |
| Language | English |
Key safety warnings include adult supervision, age limits, weight limits, and single user policy.
Advisories cover placement, maintenance, weather, and general usage rules.
Follow safety rules to prevent injury, including avoiding head landings, somersaults, fatigue, and multiple users.
Learn fundamental bounce, knee drops, hand/knee drops, seat drops, half turns, and swivel hips.
Regularly inspect parts for damage, clean with a damp cloth, and tighten hardware.
Store in a dry place, protect from weather, animals, and high winds to prolong lifespan.
Plan for a 2-person, 2-hour build. Choose a level, soft surface with adequate overhead and side clearance.
Gather a cross-head screwdriver, gloves, safety glasses, and a mallet for assembly.
Reference list of all parts, including quantities, for assembly and identification.
Assemble leg bases into 'W' shapes and connect top rails (A-F), ensuring correct orientation and spring hole alignment.
Connect assembled frame segments and join the two halves, requiring force and assistance for stability.
Lay out the mat, locate V-rings, and attach springs to V-rings and frame slots, ensuring correct orientation.
Follow the spring order diagram for even tensioning; the mat will stretch to fit correctly.
Position the frame pad over the frame, align openings with POD-connectors, and secure using ties.
Join top and bottom enclosure tubes using self-tapping screws, aligning holes for secure pole assembly.
Insert assembled enclosure poles into the frame's POD-connectors for structural support.
Lay out enclosure netting, identify top sleeves, and join black G4 poles into longer sections.
Thread poles through netting sleeves, then join pole ends with connectors, requiring two people and force.
Align pole sections with netting sleeves, then attach exposed pole ends to enclosure tubes for final fitting.
Use cords to tie the bottom netting securely to the bed's V-rings, maintaining tension.
Ensure adequate side and overhead clearance, and a clear area free from obstructions before use.
Unzip the door to enter and exit, always closing the doorway securely before bouncing.
Order parts via website or phone, providing product details, key number, quantity, and shipping preference.
