JumpPro Xcite - Locate the D-ring closest to the door of the net.; Thread one end of one of the cords (Q) through the lower eyelet of the enclosure net (P) above the D-ring and then thread the cord through the D-ring.; Thread the cord (Q) through the lower eyelet of the enclosure net (P) halfway between the first D-ring and the D-ring to the left...; Tie each end of the cord sections to the last D-ring that it reaches.

Door
Enclosure Net
D-rings on Jumping Mat
Cord (Q)
23. Locate the D-ring closest to the door of the net. Thread one end of one of the cords (Q) through
the lower eyelet of the enclosure net (P) above the D-ring and then thread the cord through the D-
ring. Tie the enclosure net to the D-ring, by making a double knot in the cord.
Door
Enclosure Net
Cord (Q)
D-rings on Jumping Mat
24. Thread the cord (Q) through the lower eyelet of the enclosure net (P) halfway between the first
D-ring and the D-ring to the left, and then thread the cord through to the left. Repeat this procedure
until all the cords are threaded through the enclosure net and the D-rings as shown. Keep the cords
taut.
20