LB management
Display standard for room temperature control
Display standard for room temperature control
Art. no.: ..1790D..
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
These instructions are an integral part of the product, and must remain with the end customer.
2 Device components
Figure1: Display and operating area
(1) Setpoint temperature, actual temperature or current time
(2) Programming menu
(3) active mode
(4) Operating area
Icons in the display
Ƙ Automatic mode is active
Ƶ
Temperature value is regulated to comfort temperature
ƶ Temperature value is regulated to ECO temperature
ƾ Cooling icon lights up: cooling mode, no cooling is taking place
Cooling icon flashes: cooling mode, cooling is taking place
ƿ Heating icon lights up: heating mode, no heating is taking place
Heating icon flashes: heating mode, heating is taking place
1 / 10
32401503 19.05.2020
J0082401503
To Next Page
General