Jung 1790D Series - Page 6

LB management
Display standard for room temperature control
The setpoint temperature and the Ƙ icon are shown in the display. Active heating is indic-
ated by the flashing heating icon ƿ. If heating is not active, the ƿ icon lights up permanently.
The Ƶ icon indicates that the system is being regulated to the saved comfort temperat-
ure.
Figure3: Setpoint temperature display in manual mode
In manual mode, the ƴ icon is displayed.
Programming menu overview
Figure4: Programming menu
Press the ƣ button to call up or exit the programming menu.
Navigate through the menu with the
–
or
+
button and confirm the selection with the ƨ button.
Ɨ Activating/deactivating the operating lock
ƙ Ʀ Ʊ Three memory areas for comfort and ECO temperature for the two weekday
blocks Mo - Fr and Sa - Su
ƛƜ Setting date, time and automatic summer time changeover
Ʋ Setting the comfort temperature, ECO temperature and cooling temperature,
activating optimised heating up, temperature drop detection and setting an offset
value
Activating/deactivating the operating lock
An activated operating lock prevents users from directly operating the system on the cover.
￭ Press ƣ button.
Ɨ flashes in the display.
￭ Press ƨ button.
No
flashes in the display.
6 / 10
32401503 19.05.2020
J0082401503