Jung 41F Series User Manual

Flat wall-mounted radio transmitter
Radio Management
Flat wall-mounted radio transmitter 1-channel
Art.-No.: ..41F..
Flat wall-mounted radio transmitter 2-channel
Art.-No.: ..42F..
Flat wall-mounted radio transmitter 4-channel
Art.-No.: ..44F..
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Keep button cells out of reach of children! If button cells are swallowed, get medical help
immediately.
Risk of explosion! Do not throw batteries into fire.
Risk of explosion! Do not recharge batteries.
The radio communication takes place via a non-exclusively available transmission path,
and is therefore not suitable for safety-related applications, such as emergency stop and
emergency call.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1
(1) Wall transmitter, CD range
(2) Base plate
(3) Fastening screws
(4) Inscription panel
(5) Inscription panel cover
(6) Wall transmitter, LS range
1/8
32532713
J:0082532713
09.12.2010

Jung 41F Series Specifications

General

Brand	Jung
Model	41F Series
Category	Transmitter
Language	English

Summary

Safety Instructions

Device Components

Function

System Information

Details on system operation, reception characteristics, and country approvals.

Intended Use

Specifies the authorized applications and mounting type for the radio transmitter.

Product Characteristics

Outlines key features like button assignment and special function capabilities.

Operation

Channel Assignment

Illustrates how channels are assigned to the wall transmitter buttons.

Sending Radio Telegrams

Explains how to transmit radio signals for lighting and blind control.

Calling Up Light Scenes

Describes the procedure to activate pre-saved lighting scenes.

Saving Light Scenes

Details how to record and save current lighting configurations.

Information for Electrically Skilled Persons

Fitting and Electrical Connection

Instructions for physically installing and connecting the device.

Gluing Mounting

Guidance on preparing surfaces and applying adhesive pads for mounting.

Changing the Battery

Commissioning

Setting Functions

How to configure button functions using the device's internal switches.

Teaching Transmitter in Radio Receiver

Process for pairing the transmitter with receivers to enable communication.

Appendix

Technical Data

Specifications including voltage, battery type, frequency, and range.

Troubleshooting

Solutions for common issues like low battery or receiver unresponsiveness.

Warranty