EasyManua.ls Logo

Jung RWM 100 WW - General Safety Instructions

Jung RWM 100 WW
28 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
press on the test and stop button
( g. 1 - IV.) and by good ventilation
of the rooms.
Please notify your neighbours in
the case of a false alarm so that
the re brigade is not alerted
unnecessarily!
GENERAL SAFETY
INSTRUCTIONS
Smoke alarms help to alert you to a
re early on, but they cannot
extinguish a re nor prevent a re
from starting, and they also cannot
alert the re brigade. When a risk
of gases from a re exists, the
smoke alarm device sounds a loud
alarm signal that alerts you to the
danger.
Despite the great care taken in the
manufacture of the smoke alarm
device, the possibility of a
malfunction cannot be ruled out
that would make the device
incapable of alerting you to the
possible re, or only too late!
Common precautions when dealing
with re, combustible materials
and technical devices must always
be observed!
This device is a closed system.
Any tampering with the inside of
the device whatsoever results not
only in the loss of all possibly
existing guarantees, but also that
the device can and may not be
used anymore for its intended
purpose! Please do not open the
device under any circumstances,
because this could cause a risk of
injury!
A change of batteries is not
necessary and also technically
impossible. When renovating, but
also in general, please protect the
device against moisture, cold,
heat, ne dust, grease, nicotine
and paint fumes, and coating
materials such as e.g. wall paint,
and adhesives, and dirt of any
kind. When carrying out renova-
tion, construction or sanding work,
the smoke alarm device should be
taken off the magnetic mount

Other manuals for Jung RWM 100 WW

Related product manuals