Jung Smart Visu Server - Commissioning the Smart Visu Server

SMART VISU SERVER + PHILIPS HUE 12
1. Select the SV-Control button [1].
5. Commissioning Smart Visu Server
After you have started operating the Philips Hue System, connect the Smart Visu (SV) Server to your home network.
 Call the SV Server in the web browser of your end device (PC, laptop, tablet).
To do so, enter the address http://sv-server.local or the IP address of the SV Server allocated by the router.
 If the SV Server is protected by a password, enter this.
2. Create a new project with Start [2] or
import an existing one with Restore
[3] and navigate to the Hue tab.
1
2
3