Jung Smart Visu - User Manual

Smart Visu Server
02.08.20231 / 40024003700
Smart Visu Server
Ref.-no.: SV-SERVER2,
SV-SERVER2-INT
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, re or property damage possible. Please read and follow manual fully.
These instructions are an integral part of the product and must remain with the end customer.
This product is only intended for use in dry rooms.
2 Device components
Fig. 1: Device components
(1) Power supply (USB type C) Only use the power supply from the scope of delivery.
(2) USB interfaces For software updates
(3) Ethernet interface For connection to the local IP network
(4) Reset button Reset and update
(5) Status LED Displays the current status of the server
3 Function
System information
The Smart Visu Server is used to visualise and operate (SV-Home) a KNX system connected to the same network via
a smartphone, tablet, laptop or PC and to control third-party IoT systems (e.g. Philips Hue).
A local network is required for it to function.
The connection to the KNX is made via the KNX IP interface.
The connection to the third-party IoT systems is made via the system devices recommended by the manufacturer
(e.g. Philips Hue Bridge).
Commissioning takes place via the web-based interface (SV-Control).
The technical documentation is also available here.
Intended use
- Visualisation and operation of KNX systems via devices with HTML5 browser or app (iOS, Android), e.g.
smartphone, tablet, laptop, PC, etc.
- Operation in local IP networks that support DHCP (Dynamic Host Conguration Protocol), or with static IP address
(IPv4)
- Operation indoors
i Further information about this device can be found on our website.
1
2
4
5
3
GB

Jung Smart Visu Specifications