SMART VISU SERVER + SONOS 3
Sonos can be integrated into
your JUNG Smart Visu Server
with just a few steps.
The table here gives an overview of
the necessary steps.
The individual steps are
described in detail on
the following pages.
STEP PAGE
1. Commissioning Sonos 4
2. Connect the Smart Visu Server to the IP network 6
3. Connect Sonos to Smart Visu Server 11
4. Connect loudspeaker to KNX rotary sensor 13
5. Connect loudspeaker to KNX push-button sensor 15
6. Configure party mode 16
7. Save project 18
2. Overview
To Next Page
Loading...
