Jung Smart Visu Server - Activate Remote Access in Smart Visu Server

SMART VISU SERVER + REMOTE ACCESS 6
1. Select the SV Control button [1].
4. Activation of the remote access in Smart Visu Server
After you have purchased a licence, now activate the remote access on your Smart Visu Server.
 Call the SV Server in the web browser of your terminal device (PC, laptop, tablet).
To do so, enter the address http://sv-server.local or the IP address of the SV Server allocated by the router.
 If the SV Server is protected by a password, enter this.
2. Navigate in SV Control to the Configu-
ration Management tab [2].
1
2