SMART VISU SERVER + PRESENCE SIMULATION 3
The presence simulation can be
implemented in your Smart Visu Server
with just a few steps.
The table here gives an overview of
the necessary steps.
The individual steps are described in
detail on the following pages.
STEP PAGE
1. Connect the Smart Visu Server to the home network 6
2. Make a connection to the KNX bus 7
3. Set up areas and functions 8
4. Create actions 9
5. Create action groups and combine actions 10
6. Duplicate action group 11
7. Save project 12
2. Overview
To Next Page
Loading...
