SMART VISU SERVER + STAIRCASE FUNCTION 5
3.2 Setting the staircase function properties
Now you can specify the properties for the staircase function such as the delay time.
1. First select switch / dimmer and then
staircase function for the function
types in the pull-down menu [1].
2. Specify a description [2].
3. Allocate
the group address for the
required
light [3] to the staircase func-
tion and also enter a value [4]:
1 = ON; 0 = OFF.
4. Select the required staircase time
(delay time) [5] from the pull-down
menu.
1
2
3
4
5
To Next Page
Loading...
