Juniper Mesa - Barcode Setup

Mesa Barcode Scanner Owner’s Manual 11
recommend that you leave it powered on. The
barcodeisconguredtoenterasleepstate
when it is inactive and consumes about 8mW
of power when it is in this state.
To minimize the Barcode Connector utility press
the X in the bottom right corner of the display.
Barcode Setup
When you select Barcode Setup, a window is
displayed with several tabs along the top. Select
thesetabstovieworeditthecongurationof
the Barcode Connector utility and the barcode
hardware. A description of these tabs follows.