2 FOR THE READER
We wish you every success in your work.
We would ask you to read through the instructions contained in this manual and acquaint yourself with your
machine, its principles of operation and the maintenance schedules all points which will affect operational safety
and uninterrupted operation during the busy sowing seasons.
It is imperative that every section of this manual is fully understood and that the instructions regarding the
machine’s operation are followed. In unclear cases, please contact your Dealer.
We also hope that you will kindly return the Certificate of Warranty after having acquainted yourself with the
instructions of this manual.
3 TECHNICAL DATA
SPARE PARTS: When ordering spare parts always specify the machine model and the year of manufacture
and also both the description and the part no. Of each part required.
S2500 T S3000 T S3000 ST S4000 ST
Working width, cm 250 300 300 400
Row spacing cm
- seed 12.5 12.5 12.5 12.5
- fertilizer 25 25 25 25
Hopper capacity
- seed maximum 1320 1584 3390 4528
- fertilizer minimum 920 1104 0 0
- seed minimum 890 1068 1593 2124
- fertilizer maximum 1360 1640 2580 3440
Filling height, cm 150 150 175 175
Tyres 7.00-12” 6ply 7.00-12” 6ply 7.50-16” 6ply 7.50-16” 6ply
Weight, unloaded, kg 1800 2200 3000 3600
Overall width, cm 284 334 334 434
STANDARD EQUIPMENT
-Electronic areal meter and hopper
level alarm sensors * * * *
-Computer controlled tramlining * *
-Fertilizer sieve * * * *
-Foot board * * * *
-Automatic rear harrow * * * *
-Lighting equipment * * * *
-Front end field drag * *
OPTIONAL EQUIPMENT
-Small seed box/start-up fertilizer
Rationing unit * * * *
-Row markers * * * *
-Disinfectant treatment unit * * * *
-Remote control unit (fertilizer) * * * *
-Tramline marker (computer oper.) * * * *
-On-board computer (Artemis) * * * *
-Drawbar for power harrow * * *
-Wheel track eradicators * *
-Front end field drag * *
-Front leveler * * * *
-Intermediate packer * * * *
-Front lifting cylinder * * * *
-Sieves for the seed hopper * * * *
3
Technical data
WARNING SYMBOL
In the manual, this symbol is used to indicate danger to the operator or other people close to
the machine.
In addition, the symbol is used when there is a risk to the environment or property.
To Next Page