These instructions are valid for the Professional and the Easy
Cappuccino Frother.
The Cappuccino Frothers can be attached to all JURA devices equipped with the
Connector System
©
.
For reasons of hygiene and to ensure perfect function of the frothers
they should be dismantled and rinsed as well as cleaned regularly if
milk has been prepared.
Dismantling and rinsing the Cappuccino Frother
Carefully pull the frother off the Connector System
©
.
Dismantle the frother completely.
Rinse all frother parts thoroughly under running water.
Reassemble the frother.
Ensure that all individual components are correctly and firmly
connected to ensure correct operation of the frother.
Firmly attach the frother to the Connector System
©
.
J
E
T
T
T
T
E
T
Professional Cappuccino Frother
Easy Cappuccino Frother
To Next Page
Need help?
General
