To Next PageTo Next Page
Need help?Do you have a question about the Jura GIGA X3c Professional and is the answer not in the manual?
General| Type | Automatic Coffee Machine |
|---|---|
| Weight | 17.5 kg |
| Customization | Yes |
| Number of Grinders | 2 |
| Programmable Specialties | Yes |
| Programmable User Profiles | Yes |
| Hot Water Spout | Yes |
| Product Type | Coffee Machine |
| Coffee Grounds Container Capacity | 40 portions |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Display | TFT colour display |
| Grinder | Ceramic |
| Specialities | Espresso, coffee, cappuccino, latte macchiato, milk foam |
| Milk System | Fine foam technology |
| Height Adjustment | Yes |
| Cleaning System | Automatic cleaning and rinsing programs, descaling reminder |
Identifies external parts and components of the GIGA coffee machine with numbered labels.
Details the placement of controls on the top, front, and back of the machine.
Specifies the intended use of the machine and defines improper usage.
Outlines critical safety instructions to prevent injury and hazards.
Details necessary preparations and requirements before machine setup.
Describes choices during initial setup: Quick or Standard installation.
Guides through Quick installation and Standard installation ('Programming') steps.
Instructions for activating and setting the CLARIS filter cartridge capacity.
Covers service technician settings, filter deactivation, and water hardness.
Explains how to determine water hardness and connect the milk system.
Introduces two main methods: touch of a button and product selector.
Details preparing drinks directly from the start screen for single and milk-based coffees.
Explains product selection via Rotary Switch and using ground coffee.
Showcases specialty recipes and how to set beverage quantities.
Instructions for dispensing hot water at various temperature settings.
Steps to power on the machine and perform essential daily cleaning tasks.
Covers periodic maintenance and the procedure for switching the machine off.
Introduction to programming and adjusting product settings like strength and temperature.
Renaming products and adding them to the start screen for quick access.
Adjusting grind consistency and configuring maintenance prompts.
Setting water hardness level and configuring energy-saving modes.
Configuring timer, measurement units, and restoring factory settings.
Customizing language, display appearance, and managing barista recipes.
Accessing counters for prepared products and maintenance programs.
Procedures for rinsing the coffee brewing system and the milk system.
Detailed steps for cleaning the milk system and dismantling the dual spout.
Instructions for changing the filter and performing a full machine cleaning cycle.
Steps for descaling the machine and cleaning the coffee bean container.
Procedure to empty the system for transport and guidelines for environmentally friendly machine disposal.
Contact details and website for the official JURA service partner.
Lists machine compliance directives and the policy on technical modifications.
Information on providing feedback and copyright restrictions for the manual.
