10
6. IMPRESSA E10/20/25 rinsing upon display
request
When the IMPRESSA E10/20/25 was switched off and has
cooled down in the meantime, a rinsing operation is started
when the machine is switched on again. When the machine is
switched off, a rinsing operation is started automatically.
Switch on the IMPRESSA E10/20/25 using the ON/OFF key
(6).
flashes
lights up
Press the maintenance key (4).
flashes
lights up
6.1 Rinsing the IMPRESSA E10/20/25 without
display request
Press the maintenance key (4) until
or or appears
Turn the water quantity switch (1) until
lights up appears.
Press the maintenance key (4).
flashes
lights up
7. Adjusting the water quantity for coffee
You can set the amount of water with the water quantity
switch (1) before or while making coffee.
If you press the draw-off key for 2 cups (2) the water
quantity is doubled automatically.
You can change/stop the water quantity during the draw-off
operation, too.
8. Drawing off 1 cup of coffee
You can increase the strength of your coffee at any time
during the grinding operation by pressing the 1 cup (5)
draw-off key again.
For Example: Press the 1 cup (5) draw-off key three
times to get a strong coffee
lights up, flashes
You can choose among three strengths at the push of a
button. The longer you press the draw-off key for 1 cup
(5), the stronger your coffee will be
MILD / NORMAL / STRONG.
You can set the amount of water with the water quantity
switch (1) before or while making coffee.
You can stop the process of making coffee at any time by
pressing key (5) or (3).
lights up
Put a cup under the adjustable coffee spout (15).
Press the draw-off key for 1 cup (5) until the required strength
is displayed:
For Example: lights up. flashes
Your product is being prepared.
lights up
9. Drawing off 2 cups of coffee
Selecting the coffee strength is not possible when drawing
off 2 cups of coffee. You will draw off 2 mild cups auto-
matically.
To Next Page
Loading...
