Jura Impressa S 55 User Manual

Services Unlimited, Inc./ Parts Guru
Installing thermoblock S-series
S 55-95, X-70-95, Scala,
Ju
3
r
0
a
0
I
/
m
50
p
0
re
,
s
6
sa
01
T
,
h
E
er
v
m
o
o
lu
b
t
lo
io
ck
n,
T
U
B
l
-
t
9
r
6
a
:
, Cappuccinatore, M30,
4000/6000
In this guide, the removal and installation of the Thermo Block 96 is described
in a Jura S9. Similar models with fewer features may have different wiring and
hose routing. It is advised the wiring and hose connections are clearly
marked/tagged and pictures taken to not lose the right connections and
positions.
For Jura parts, and fast repairs, Contact:
Serviices Unlimited, Inc./ Parts Guru
Lansdale, PA 19446
Phone: 215-361-7000 Fax: 215-361-7434
email: sales@partsguru.com 1 of 34

Jura Impressa S 55 Specifications

General

Coffee Grounds Container Capacity	16 servings
Pump Pressure	15 bar
Coffee Types	Espresso, Coffee, Cappuccino, Latte Macchiato
Power	1450 W
Number of Grinders	1
Grind Settings	Adjustable
Power Consumption	1450 W
Voltage Range	220 - 240 V
Type	Automatic Coffee Machine
Brewing Unit	Yes
Height	340 mm
Width	245 mm
Depth	390 mm
Frequency	50 Hz

Summary

Jura S-series Thermoblock Installation Guide

Jura Coffee Machine Repair Safety

Critical Safety Warnings and Precautions

Emphasizes user experience, unplugging, insulation, and marking connections to prevent damage or injury.

Jura Thermoblock Disassembly: Initial Steps

Jura Thermoblock Disassembly: Panel Removal

Jura Thermoblock Disassembly: Internal Wiring

Disconnecting Solenoid Valve Coil Wire

Instructions to visually inspect and disconnect the blue wire from the solenoid valve coil.

Jura Thermoblock Disassembly: Regulator and Pump

Removing Regulator Clip and Pump Wire

Steps to remove the hairpin clip from the diaphragm regulator and disconnect the wire from the pump.

Jura Thermoblock Reassembly: Sensor Securing

Jura Thermoblock Reassembly: Thermoblock Cage

Inserting TB Assembly and Fastening Main Bolt

Guide on inserting the ThermoBlock assembly into the cage and fastening the hex head bolt.

Jura Thermoblock Reassembly: Cage Engagement

Jura Thermoblock Reassembly: Hose Connections

Connecting Teflon Hose and Regulator Hose

Details on preparing hose ends and connecting Teflon hose and diaphragm regulator hose correctly.

Jura Thermoblock Reassembly: Final Seating