http://www.jurop.it
e-mail: info@jurop.it
Pump PN130 – PN140 – PN155
• Rotary vacuum pump with radial vanes and air cooling system.
• Automatic lubrication with volumetric pump and side mounted tank.
• Built-in vacuum-pressure change-over valve.
• Non return valve (rubber ball) inside pump manifold.
• Aluminium conveyors.
• Direct drive with smooth shaft, right or left rotation.
• Gear box drive (splined shaft ASAE 1 3/8) 540 rpm or 1000 rpm,
left rotation.
• Direct drive with splined shaft ASAE 1 3/8, left rotation.
• Hydraulic drive with gear motor, left rotation.
Pump PN155R
As model PN155. In addition:
• Extra air injection cooling system.
• High resistant vanes.
Other features on request
• Rotation other than the standard one.
• Pneumatic or hydraulic actuator for the 4-way valve.
• Flanged manifolds are available on request.
Weight PN130 PN140 PN155 - PN155R
Direct drive 165 kg 173 kg 194 kg
With multiplier (540 rpm or 1000 rpm) 186 kg 194 kg 216 kg
Hydraulic drive with gear motor 197 kg 205 kg 227 kg
2.1. Dimensions PN130 – PN140
Versions smooth shaft and splined shaft – PN130 – PN140
PN130 D smooth shaft, L rotation - cod. A450909410 PN130 D smooth shaft, R rotation - cod. A450809410
PN130 D left splined shaft - cod. A450709410
PN140 D smooth shaft, L rotation - cod. A200909410 PN140 D smooth shaft, R rotation - cod. A200809410
PN140 D left splined shaft - cod. A200709410
To Next Page
Loading...
