Scan this QR code to watch
a video and learn how to
use your Just diffuser.
Just offers a wide variety of essential oils, both pure and blended
synergies for you to use in your ultrasonic diffuser.
Choose the one that best suits your day and needs.
Here are a few of our favorite combinations!
IDEAL ESSENTIAL OIL COMBINATIONS
Lemon + Neroli
+ Rosemary
Bergamot + Lemon
+ Neroli
Bergamot + Lemon
+ 3 Mints
Bergamot + Lemon
+ Jasmine
3 Mints + Lemon
+ Palmarosa
Lavender + Orange
+ Palmarosa
Orange + Lavender
+ Neroli
Chamomile +
3 Mints + Lavender
Geranium +
Lavender + Orange
Neroli + Palmarosa
+ Orange
Water tank: 500 ml / 17 fl oz
7 colours of LED light, each one with two intensities
Operates with timer 1hr / 2hr / 3hr
2 mist output options: high and low
Remote control - battery included
Does not include essential oil
Mists for approximately 18 hours on low/Continuous 12 hours on high
water tank
base
mist outlet
socket
air input
Unplug the unit from the electric outlet and remove the top lid.
Pour out the remaining water from the opposite side of the air outlet to prevent water from
entering and damaging the unit.
Clean the unit with a clean, soft cloth or cotton swab. If there are buildup residues, you may
clean the water tank with a solution of rubbing alcohol and water or citric acid diluted in
warm water and soak for 5 minutes. Empty and fill with clean water to rinse.
Never use acids, enzymes, detergents and abrasives to clean the unit.
When cleaning the unit, prevent sharp objects from coming into contact with the ceramic
disc or ultrasonic vibration plate.
Cleaning: Each time an essential oil is changed (or every 3 days of use approximately).
Use your measuring cup to pour cold tap water into the water tank
without exceeding the maximum water level. Depending on the amout of
time you plan to use the diffuser add 15-20 drops of essential oil.
Place the diffuser on a flat, water-resistant surface during operation.
The diffuser will automatically shut off when water level becomes too low.
Place the diffuser away from air currents.
Connect the power cord into the socket on the base of the diffuser.
Each time you push the “Mist” button you will be programming its
operation for 60, 120, 180 minutes, ON and OFF.
Press the “High/Low” button to adjust the steam output
intensity (strong or soft).
Press the “LIGHT” button to turn the LED LIGHT ON or OFF. Pressing
the button several times varies the intensity and color of the light.
If there is no water in the tank, pressing the “MIST” button will cause the
unit to beep 3 times to remind you to add water.
Place the top cover back on the base.
Plug the power adapter into the electrical outlet.
Push the “Mist” button to turn on the diffuser.
To ensure your diffuser’s long life, follow these simple instructions carefully.
Use only pure essential oils or essential oil blends in your diffuser (do not use bath essences
or bath foams).
Use only clean, cold tap water to fill the water tank.
Do not move the unit once you have filled the tank with water to avoid spills.
Disconnect the device from the power outlet when not in use.
Always use your measuring cup to add the water to the tank. Never fill the tank directly from
the tap.
Do not turn on the diffuser when the water tank is empty.
Always place the diffuser on a flat and stable surface. Never on carpet, bed, cushions, or
unstable surfaces.
Do not tilt the product to prevent water from entering the unit causing malfunction.
Do not move the diffuser while it’s on.
Always unplug the power supply before doing maintenance.
If the diffuser is accidentally overturned, unplug, empty the water and let dry for 72 hours.
Essential oils can damage certain surfaces. In case of spill, clean quickly with a soft cloth.
Avoid diffusing directly on furniture, fabrics, walls, TV, audio equipment, etc.
Keep away from direct sunlight.
Do not expose or immerse the fan (air input and outlet) in water.
Do not touch any part of the unit with wet hands.
Do not touch the ultrasonic vibration plate.
Use the device with the supplied power cables and adaptors.
Keep the cord clear of pathways and do not pull hard at any point.
If you see or smell smoke or if an abnormal noise is detected, unplug the device immediately.
Keep the diffuser out of children´s reach.
Store your diffusing oils in a cool, dark place with the lid tightly closed.
Lack of water in the tank.
The diffuser
does not
switch on
The tank does not have
enough water or has too
much water.
Clean the air suction port.
The unit was tipped and water
entered the diffuser.
Unplug, empty the water and let dry for 72
hours before plugging back in.
The amount
and intensity
of steam
produced is
variable
Room conditions (very dry or
very humid) may affect steam
output intensity.
Place the diffuser away from airflow,
excessive steam and external factors that
may affect the proper functioning of the unit.
Clean the unit to ensure that there is no
residue inside.
Carefully disconnect and reconnect cables.
Place the correct amount of water.
Remove the lid and place correctly.
Cable is incorrectly attached
or loose.
The lid is incorrectly placed.
Intermittent function
activated.
The lid is incorrectly placed.
There is dirt in the air suction
port.
Remove the lid and place correctly.
Ensure that “continuous” mode is on.
https://www.just-america.com
To Next Page
General