juwel DOUBLELOCK User Manual

JUWEL S.p.A.
Certified EN ISO 9001:2000 - Via I° Maggio 3/E - 20010 - Vanzago (MI) Italy
Tel +39 02/9347441 Fax +39 02/93570804 info@juwel.it
www.juwel.it
P.IVA 00692460421
Prohibited partial reproduction also | © Juwel 2009
Prestigious Safes Since 1922
ELECTRONIC COMBINATION
“ DOUBLELOCK “
NORMAL MODEL
A) HOW TO OPEN
Press (
C
), digit the
Opening Code
(initially 0000) and press (
E
). If after having pressed (
C
),
ERROR
lights up (see Manipulation Warning in General Notes), you can proceed all the same.
B) HOW TO CLOSE
Press (E). If an obstacle hinders the closing, ERROR blinks and the bolts open
themselves again. Remove the obstacle and press again (E).
C) HOW TO CHANGE THE OPENING CODE
OPEN DOOR, BOLTS WITHDRAWN OUTSIDE THE DOOR (closed lock).
1 -
Open (as per point A). OK lights up for 6 sec.
2
-
Before OK switches off, press (C) and HOLD PRESSED until CHANGE
lights up.
3
- Digit the
New Code
(from 3 to 8 digits) and press (
E
).
4
- Once again, for confirmation press:
New Code
, (
E
).
OK
lights up.
5 - Before closing the door, check the new code (close and open).
GENERAL NOTES
BATTERY - The safes are supplied without battery. The battery-
holder lies in the small door placed in
the in
ternal side of the door. The battery consists of 4 ALKALINE LR6 piles of 1,5 V. When the electric
charge goes below a certain level, BATTERY
blinks after each opening or closing and it is necessary to
change the piles. However, at least 50 openings are sti
ll allowed and, furthermore, there is the
possibility of external energy supply (even in case of completely exhausted piles) by help of a small
cable supplied in the equipment.
ANTIMANIPULATION SHUTDOWN - After 3 attempts to open by wrong codes, the ke
yboard
switches itself off for 8 minutes, during wich ERROR
blinks every 6 sec. An acoustic signal tells you
when you can operate again. But if you try again before 30 minutes have elapsed, then the keyboard
switches itself off again for 8 min. after each wrong attempt (EN and VdS Regulations).
MANIPULATION-WARNING - If by effecting an opening in the right way, ERROR
lights up and you
can hear a long sound, this means that at least one manipulation-
attempt has occurred since the last
opening .
ELECTRONIC KEYBOARD – Each push-button must be pressed within 15 sec. f
rom the previous one,
otherwise the system switches itself off and you must repeat again from the beginning. In order to
cancel eventual digiting-errors, press (C) (=CLEAR).

juwel DOUBLELOCK Specifications

General

Brand	juwel
Model	DOUBLELOCK
Category	Locks
Language	English

Summary

Normal Model Operations

How to Open

Instructions for opening the safe using the electronic combination, including initial code and error light handling.

How to Close

Procedure for closing the safe, detailing obstacle detection and automatic bolt retraction.

How to Change Opening Code

Steps to modify the existing opening code, involving specific button sequences and confirmations.

General Notes for Normal Model

Battery Information

Details on battery type, replacement indicators, and external power supply options.

Anti-Manipulation Shutdown

Explanation of keyboard lockout periods after multiple incorrect code entries.

Manipulation Warning

Description of the warning signal indicating unauthorized access attempts.

Electronic Keyboard Usage

Guidelines for using the keypad, including time limits between presses and error correction.

Hotel Model Instructions

Opening by Master Code

Procedure for opening the safe using the hotel's master code.

Closing Procedure

Instructions for closing the safe, including handling obstacles.

Changing Master Code

Steps to change the master code for the hotel safe.

Hotel Model Client Operations

Memorize Combination Code

Guide for clients to set their personal combination code for the safe.

Client Closing

Procedure for the client to close the safe.

Client Opening

Instructions for clients to open the safe using their combination code.

Time-Delay Model Operations

How to Open with Time Delay

Procedure for opening the safe, which requires a programmed time delay.

How to Close with Time Delay

Instructions for closing the safe, including obstacle handling.

Changing Opening Code

Steps to change the opening code for the time-delay model safe.

Programming Time of Delay

Guide on setting the desired time delay for safe opening.

Blocking Electronic System Model

How to Open (Key + Keyboard)

Procedure for opening when the electronic lock blocks the key access.

How to Close (Key + Keyboard)

Instructions for closing and blocking the electronic system using the key.

Changing Opening Code (Key + Keyboard)

Steps to change the opening code for the blocking system.

Release Electronic System Model

How to Open (Wheel + Keyboard)

Procedure for opening when the electronic lock releases manual opening.

How to Close (Wheel + Keyboard)

Instructions for closing the release system using the control wheel and keyboard.

Changing Opening Code (Wheel + Keyboard)

Steps to change the opening code for the release system.

Starting Instructions and Safe Placement

Initial Setup

Instructions for inserting the battery and memorizing the initial code for various safe models.

Battery Replacement Advice

Recommendation for annual battery replacement for optimal safe functioning.

Wall Safes Installation

Guidance on protecting the safe during wall installation and initial humidity management.

Free-Standing Safes

Note on the essential requirement for firm fixing of free-standing safes.