JVA Z Series Quick Start Guide

Page 8
© JVA Technologies.
Z-Series Quick Start Manual
Command Key1 Key2 Keys 3 and 4 Key5
Gate Entry/Exit
Delay (S=Seconds,
M=Minutes)
1 3 00 01 02 03 04 05 06 07 08 09 #
0S 30S 1M 2M 3M 4M 5M 6M 7M 8M
Chime Mode 1 4 01 02 03 04 05 #
None Door Chime Siren Fence
Alarm
Gate Beeps
Plus Siren
Combined Opons 1
(add up the opons
you want. e.g. for
Max Power and Limit
output:
2 + 4 = 6 Therefore
enter 06 for keys 3
and 4
1 6 +2 +4 +8 +16 +32 #
Maximum
Power at all
mes
Limits out-
put to 2.5J
per Zone
Enables IR
Tamper.
Stop slaves
on comms
fail
Stop Ener-
gizer send-
ing alarm
memory
An Bridging
Threshold
1 7 Enter in the percentage dierence required to trigger the An-
Bridging alarm. e.g. if you require a 10% change in return voltage to
trigger the alarm, enter 10 for keys 3 and 4. Default is 00 (Disabled)
#

JVA Z Series Specifications

General

Brand	JVA
Model	Z Series
Category	Power Supply
Language	English