JVC AV28WT5EPS User Manual

No. 51776
A
V28WT5EPS AV24WT5EPS
A
V28WT5EIS AV24WT5EIS
A
V28WT5EKS AV24WT5EKS
22
(3)
Method of Setting
1) Method of Setting
1.IF
[VCO]
①
1 Key
････････････････････････
Select 1.IF.
②
The VCO (CW) screen will be displayed in yellow when the AFC voltage is at a certain level and in blue when it is at other levels.
③
INFORMATION Key
････････････
Return to the SERVICE MENU screen.
2) Method of setting
2.V/C, 3.AUDIO, 4.DEF
and
5.VSM PRESET.
①
2
～
5 Key
･････････････････････
Select one from
2. V/C, 3. AUDIO, 4. DEF
and
5. VSM PRESET
.
②
FUNCTION UP/DOUN Key
･･････
Select setting items.
③
FUNCTION -/+
････････････････
Set (adjust) the setting values of the setting items.
(Use the number keys of the REMOTE CONTROL UNIT for setting of WHITE BALANE.
For the setting, refer to each item concerned.)
④
MENU Key
････････････････････
Memorize the setting value.
(Before storing the setting values in memory, do not press the CH, TV, POWER ON / OFF key -
if you do, the values will not be stored in memory.)
⑤
INFOMATION Key
･････････････
Return to the
SERVICE MENU
screen.
3) Method of setting
6.VPS
and
7.AUTO PROGRAM
.
6.VPS
･･･････････････････････････
This mode displayed monitor of VPS systems.
(Do not adjust)
7.AUTO PROGRAM
･･･････････････
When the MAIN POWER is turned on with the state of AUTO PROGRAM ON, you get a mode
that initializes every existing set value including language selection. Because this mode is set
at the factory upon completion of the adjustment, you need not to use it for service.
(Do not
adjust in this mode.)
(4)
Release of SERVICE MENU
1) After completing the setting, return to the SERVICE MENU, then again press the INFORMATION key.

JVC AV28WT5EPS Specifications

General

Brand	JVC
Model	AV28WT5EPS
Category	TV
Language	English