JVC CA-UXG28 - Timer Operation Details and Management; Timer Inactivation and Off Time Setting

20
3 Set Off Time
1 Set Off Time setting.
2 Set time.
See the step 2 1, 2
You can not set On time and Off time on the same time
setting.
4 Select the playback source.
1 Select the source.
2 Select the playback source; “CD”, “USB” or
“TUNER”.
When you select “TUNER”
–1 4/¢ Select “AM PRE” or “FM PRE”, then press
TIMER.
–2 4/¢ Select preset number, then press TIMER.
5 Set TIMER active .
The Timer indicator lights on the display and TIMER
lamp on the main unit.
6 Set the System STANDBY.
To inactivate the TIMER.
When the System turns on.
The timer ( ) indicator on the display and the TIMER
lamp of the main unit go out.
• When setting both SLEEP TIMER and DAILY TIMER,
the timer which turns the unit off earlier takes precedence.
TIMER
TIMER
TIMERCD
USB
MEMORY
FM/AM/AUX
TIMER
TIMER
Body.fm Page 20 Monday, May 21, 2007 11:45 AM