JVC D Series - Page 14

Connecting to a Camcerder
r other equipment to yo-_urtelevision by using
e us!ng the t÷fevisiods lear input Jacks, us!ng I
]
Hlustration of AVo27D305
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the front of the TV.
2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the
LEFT AUDIO IN on the front of the TV.
3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the
RIGHT AUDIO IN on the front of the TV.
Note:
if your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
LEFT AUDIO IN.
These front input jacks are located under the front panel door. To access, pull on the door to
open it.