Theautotunersetupfunctionisdescribedonpage17astheinteractiveplug-inmenu.Ifyou
needtoruntheautotunersetupagain,followthestepsbelow.
(_ PresstheMENUbutton
A_' ToAUTOTUNERSETUP
4 _" Tooperate
4 _ TochooseCABLEorAIR
_" TomovetoSTART
4 _ TostartAutoTunerSetup
SE£ECT BYB_
OPERATE BYe@ EXIT BY]I[_Ilil
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Channel summary allows you to customize the line-up of channels received by your TM You can
add or delete channels from the line-up or prevent any unauthorized viewers from watching any
or all !81 channels.
(_[}) Press the MENUbutton
AV To CHANNEL SUMMARY
4 _ To operate
The Channel summary screen will now be displayed with 0_0_O_N _ _O_OSOAN
the channels set to scan marked with an %'. You can 1 _ 6
2 i 7
delete channels from the scan by removing the "\". If any s L 8
channels were missed during auto tuner setup and you 4 _ 9
wish to add them, you may by placing an %" next to the '_ _ _o,_
channel number.
OPERATE BYI_ EXET BYI_I
AI_" To the SCAN column
4 _ To include or delete from scan
t_ Press the EXIT button when finished
You can block access to a channel by activating the channel lock.
(_ Press the MENUbutton
A_' To CHANNEL SUMMARY
4 _ To operate
AV To the Lock Column ( I_1)
(_ Press the ZERO button to lock or unlock that channel
(_ Press the EXIT button when finished
To Next Page
