JVC D Series - Sound Adjust; Sound Settings; MTS (Multi-Channel Television Sound)

Thesesettingsallowyoutochangeandadjustthesoundonyourtelevision,
BASS=Youcanincreaseordecreasetheleveloflow-frequencysoundintheTV'saudiowith
thebassadjustment,
TREBLE=Usetrebletoadiustthelevelofhigh-frequencysoundinyourTV'saudio,
BALANCE=AdiustthelevelofsoundbetweentheTV'sleftandrightspeakerswiththe
balancesetting,
I2
,&Y
12
Rote:
Press the MENUbutton
To BASS, TREBLE or BALANCE
To adjust the setting
To move to the next setting
Press the EXIT button when finished
rl .p_ SOUND _ ,_, Jvl_
-- ADJUST
TREBLE .......... II ..........
BALANCE .......... II. ........
SMART SOUND _OFF_
_NEXT PAGE
SELECT BY_ RESET BYE
OPERATE BY_ EXIT BY II_I_Iil
If you press the 0 button, you can reset the settings to the factory default setting,
MTS technology allows several audio signals to be broadcast at once, giving you a choice
in what you wish to hear with a TV program, in addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP),
2 Press the MENU button
,&_" To MTS
4 I_ Select the mode
(The ON AIR arrow tells you if a broadcast is in stereo and/or contains an SAP),
2 Press the EXIT button when finished
Notes:
Keep the TV in stereo mode to get the best sound quality, The sound will work in stereo
mode even if a certain broadcast is in mono sound only'=
Choose the mono setting to reduce excessive noise on a certain channel or broadcast,
Selecting SAP will allow you to hear an alternative soundtrack, if one is available=
MTS is unavailable if your television's input source is in input 1, 2, or 3 mode, as described on
page 42,
Decreases high sound levels, giving a regulated sound level,
2 Press the MENU button
AT To SMART SOUND
41 _ To turn ON or OFF
2 Press the EXIT button when finished