• 0 0
The on/off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you're not
home.
AY
4_
4_
V
4_
V
V
4_
V
4_
V
4_
T
4_
4_
Press the MENU button
To ON/OFF TIMER
To operate (begins with ON TIME)
To set the hour (AM/PM) you want the TV to turn
on
To move to minutes
To set the minutes
OFF TIME 10:00 PM
MODE • EVERYDAY)"
ON/OFE TIMER _IN O)*
FiNiSH
SELECT BYt3_
OPERATE BY_J[_ EXIT BYl_iil
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIME the same way as ON TIME
To accept OFFTIME and move to CHANNEL
To select channel
To ON VOLUME
To set the volume level
To move to MODE
Choose ONCE or EVERYDAY
To ON/OFF TIMER
Choose YES to accept the timer setting, choose NO if you don't wish to accept
To FINISH
To save settings
Press the ExF button when finished
Notes:
The on/off time cannot be set to locked or guarded channels.
In order for the on/off timer to work, the clock must be set.
After a power interruption, the timer settings must be reset.
If you turn on your TV set before the on time, when the TV reaches the on time that you set,
the "SWiTCHiNG TO ON TIMER" will appear. This means that the TV is going to change to
your on/off timer setting.
To Next Page
Loading...
