JVC EX-A1

34
Presetting stations in the system allows you to
easily tune in to a station.
NOTE
Set the remote control mode selector to
AUDIO before using the number buttons.
The system stores up to 30 FM stations and up to
15 AM stations.
1 Select a station you want to
store (A page 33 for how to
select).
2 Press MEMORY.
Figures (memory number) blink on the display
window for about 5 seconds.
3 Select the number you want to
store by pressing cursor 2 /3
while the memory number is
blinking.
• You can also select the number by using the
number buttons.
• Refer to “How to use the number buttons”
(A page 16).
4 Press MEMORY or ENTER while
the selected number is blinking.
“SET” will be displayed and the selected
station will be stored.
NOTE
Storing a new station to a used number erases the
previously stored station.
1 Press FM/AM repeatedly to
select either FM or AM.
2 Press the number buttons to
select the memory number of a
station you want to tune in to.
Refer to “How to use the number buttons”
(A page 16).
You can also select by pressing cursor
2 /3.
Presetting stations
Cursor
(2 /3 )
/ENTER
Number
buttons
Tuning in to a preset
station
Tuning in to a preset station
Listening to radio
EXA1[UJ].book Page 34 Monday, January 19, 2004 1:54 PM