42
ENGLISH
Indications Selectable settings, [reference page]
Equalizer
*
1
Flat/Hard Rock/R&B/Pop/
Jazz/Dance/Country/
Reggae/Classic/User
1/User 2/User 3
You can select a preset equalizer settings.
[Initial]; Flat
You can adjust the sound modes and store your own
adjustments in User 1/2/3.
1 Select the frequency band to adjust—
60 Hz, 150 Hz, 400 Hz, 1kHz, 2.5kHz, 6.3kHz, 15kHz.
2 Adjust the level of the selected band (–05 to +05).
3 Repeat steps 1 and 2 to adjust other frequency bands.
4 Press ENT.
5 Select the preset name (User 1, User 2, User 3) you want
to store the setting into.
6 Press ENT.
Sound
Fader/Balance
Adjust fader—speaker output balance between the front and
rear speakers.
•Upmost—front only
•Downmost—rear only
When using a two-speaker system, set the fader to the center
(00).
Adjust balance—speaker output balance between the left and
right speakers.
• Leftmost—left only
• Rightmost—right only
Press ENT to finish the procedure.
*
1
Not selectable when DISC is the source and the surround function is activated (see page 26).
Adjusts fader
Adjust balance
Adjust balance
Adjust EQ level
Select frequency band
Select frequency band
AVX2[E].indb 42AVX2[E].indb 42 06.1.26 2:01:31 PM06.1.26 2:01:31 PM
To Next Page
Loading...
Need help?
General
