JVC GR-AX470EE User Manual

22 EN
PAUSE
GAIN UP S.LX
TELE MACRO OFF
INTERVAL TIMER OFF
REC TIME OFF
JLIP ID NO. 07
SET CHARACTER 
DATE/TIME 
END :MENU KEY
GAIN UP NORM
TELE MACRO ON
INTERVAL TIMER 1MIN
REC TIME 1/2S
JLIP ID NO. 07
SET CHARACTER 
DATE/TIME 
END :MENU KEY
+
–
Using Menu For Detailed Adjustment
This camcorder is equipped with Program Manager, an
easy-to-use, on-screen menu system that simplifies many
of the more detailed camcorder settings.
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
ACCESS MENU SCREEN
2
Press MENU.
SELECT FUNCTION
3
Press + or – to place the highlight bar on the desired
function.
MAKE SETTING
4
The setting procedure depends on the function you
select.
If you select GAIN UP, TELE MACRO, INTERVAL
TIMER, REC TIME or JLIP ID NO. . . .
.... press FAR or NEAR to cycle through the choices
until the desired setting appears.
If you select SET CHARACTER or DATE/TIME, . . .
.... press NEAR to access the selection menu for
each function (SET CHARACTER – Z pg. 19;
DATE/TIME – Z pg. 7).
CLOSE MENU
5
Press MENU. The normal screen reappears.
NOTE:
The menu is available only in the Record-Standby mode.
RECORDING Advanced Features (cont.)
MENU
NEARFAR
If GAIN UP or TELE MACRO in the Menu has
been changed from the factory settings, this
mark appears in the viewfinder.
Downloaded from: https://www.usersmanualguide.com/

JVC GR-AX470EE Specifications

General

Brand	JVC
Model	GR-AX470EE
Category	Camcorder
Language	English