EN7
USING AC POWER
Use the AC Adapter (connect as shown in the illustration).
NOTES:
●
The provided AC Adapter features automatic voltage
selection in the AC range from 110 V to 240 V.
●
For other notes,
Z
pg. 42.
To DC IN
connector
To AC outlet
AC Adapter
Charge marker
A charge marker is provided on
the battery pack to help you
remember whether it has been
charged or not. Two colors are
provided (red and black)—you
choose which one means
charged and which means
discharged.
ATTENTION:
Before detaching the power source, make
sure that the camcorder’s power is turned
off. Failure to do so can result in a
camcorder malfunction.
NOTES:
●
Recording time is reduced significantly under the
following conditions:
•
Zoom or Record-Standby mode is engaged repeatedly.
•
The LCD monitor is used repeatedly (models equipped
with LCD monitor only).
●
Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
USING THE BATTERY PACK
Perform step 1 of “CHARGING THE BATTERY PACK”
(Z pg. 6).
Approximate recording time (unit: min.)
1 When using models equipped with LCD monitor
2 When using GR-SX860/AX760
( ) : when the video light is on
(GR-SXM330/AXM230 only)
Battery pack
BN-V11U
BN-V12U
(optional)
BN-V20U
(optional)
BN-V400U
(optional)
Viewfinder on
12
95 100
(50)
95 100
(50)
150 165
(85)
360 385
(205)
LCD monitor on
1
80
(45)
80
(45)
135
(75)
315
(190)
Downloaded from: https://www.usersmanualguide.com/
To Next Page
Loading...
Need help?
General
