—5—
Connecting the DV cable
Connect the DV cable to use PowerProducer in capturing video.
1 To assure safety, make sure all
units are turned off before
making any connections.
2 Use the DV cable to connect the
camcorder to the PC.
NOTES:
● It is recommended to use the AC
Adapter as the power supply instead
of the battery pack.
● When the DV cable is connected, turning
on or off the camcorder causes
malfunctions of the PC.
● If PowerProducer does not recognize the
camcorder, exit PowerProducer once,
then start it again.
● When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
● Connect the DV cable first to the PC, and
then to the camcorder.
● Connect the DV cable (plugs) correctly
according to the shape of the DV
connector.
Connections (Windows
®
)
PC
Camcorder
DV cable (optional)
To DV connector
To IEEE1394
connector
To Next Page
Loading...
Need help?
General
