2-32 (No.86700)
2.3.5 Disassembling procedure table
This table shows the order of parts removal when replacing each part. For replacement, remove the parts in the order of 1 to 13 shown
in the table and install the parts in the reverse order.
The symbol number before each part name shows the number in the figure “Layout of the main mechanism parts”. T and B on the
right of each part name show the side from which the part should be removed (T: From the front of the mechanism, B: From the rear
of the mechanism, T/B: From both sides).
Front(T)/Back(B) of mechanism
Number of removal steps
Earth spring (1)
Top frame
Cassette holder
Side frame (L)
Drive arm
Side frame (R)
Lid guide
Idler arm
Idler gear 1/2
Main brake (T)
Reel disk (T)
Tension arm
Tension arm base
Press lever
Control cam
Capstan brake assy
Loading motor assy
Belt
Fixing plate
Load gear
Loading gear assy (S)
Loading gear assy (T)
Control plate
Clutch unit
Direct gear
Removal parts
Symbols and numbers
Symbols and numbers
(Reference items)
Replacement parts
2.1 T 1
2.1 T 2 1
2.1 Cassette holder T 3 1 2
2.1 T 3 1 2
2.1. Drive arm T 51234
2.1 T 3 1 2
2.2 T 1
- FE head T/B 1
2.3 T 1
2.3 T 1
2.3
T2 1
2.4 T4123
2.4 T5123 4
2.5 T6123 45
2.5 Reel disk (T) T 7123 456
2.5 T6123 45
2.5 Reel disk (S) T 7123 45
2.5 T7123 45
T8123 45
T8123 45
2.5 T8123
456
2.5 T7123456
2.6 B 1
2.6 Control cam B 2
2.6 Capstan brake assy B 3
2.6 Loading motor assy B 4
2.7 Belt B 1
2.7 Capstan motor T/B 2
- T/B 1
2.7 B 1
2.7 Load gear B 2
2.7
Loading gear assy(S)
B3
2.7
Loading gear assy(T)
B4
-T/B4
-T/B5
- Load gear base B 5
2.7 Control plate B 6
- T/B10123456
2.8 B 2
2.8 B 3
-T/B6 12
- T/B14123 45
6
6
67
67
7
1
12
123
1
1
12
123
123
1234
1234
12 345
78 9
1
1
6789 101112 13
L1 - - L2 - R1 T6 T12 T11 T4 T10 T16 T15 B12 B11B13 B9 B10 B2 B4 B3 B1 B5 B8 B15
L1
-
-
L2
-
R1
T3
T17
T7
T6
T5
T12
T11
T4
T10
T16
T13
T15
-
-
-
-
T8
T14
B12
B11
B13
B9
B10
B14
-
B2
B4
B3
B1
T1
T2
-
B5
T9
B8
B15
B7
B6
3
4
5
2
Top frame
Tension arm
Tension arm base
T-up lever
T-up head
Brake lever
Rec safety lever
Pole base assy(S)
Pole base assy(T)
Drive lever
Tension arm lever
Earth spring (1)
Side frame (L)
Side frame (R)
A/C head
Guide arm assy
Lid guide
Pinch roller arm assy
Idler arm
Idler gear 1/2
Main brake assy (T)
Press lever
Wire holder
Fixing plate
Clutch unit
Direct gear
Change lever
To Next Page
Loading...
