(No.86700)2-9
2.1.5.4 [ 7 ] TENSION ARM ASSY
[ 8 ] SLANT POLE ARM ASSY
[ 9 ] TU ARM ASSY
[10] SWING ARM ASSY
NOTE 7:
When detaching, remove the spring of the [12] PAD ARM
ASSY in advance.
Pay attention to the attachment position.
NOTE 8:
When mounting the SLANT POLE ARM ASSY, hook the
spring onto the lug as in diagram A, and fit the combination
onto the SLIDE DECK ASSY. After fitting, hook the spring onto
the lug of the SLIDE DECK ASSY as in diagram B.
Be careful not to lose the spring.
NOTE 9:
Pay attention to the attachment position.
NOTE 10:
When detaching, remove the screw then remove the SWING
ARM ASSY by pulling it up and turning it.
Fig.2-1-17
NOTE 7
SPRING
NOTE 8
SPRING
AB
NOTE 9
NOTE 10
[10]
[9]
[7]
[8]
(S10)
(L9)
11
(P8)
NOTE 7
NOTE 7
NOTE 8
NOTE 10
NOTE 9
(L7)
To Next Page
Loading...
