JVC GY-X1TC - PREPARATIONS; Attaching the VF-P115 viewfinder; Attaching the HZ-714 zoom lens

PREPARATIONS
1. Loosen the stopper screw.
2. Attach the viewfinder with its guide aligned with the shoe.
3. Connect the cable.
4. Tighten the stopper screw.
5. Tighten the ring.
. Loosen the mount ring.
. Attach the jens with its pin aligned with the hole in the
mount.
. Tighten the mount ring.
Be sure to tighten the ring completely, otherwise the lens
might drop or the back focus might shift.
4. Connect the cable.
Positioning marks (¥) facilitate connection.
no —
(ev)
When unplugging the cable, grasp this portion and pull up.
If you have any difficulty, it may be better to remove the lens
itself first. In this case, be careful not to drop the lens.
5