- 6 -
1
NC OFF
HA-S90BN
2
×1
1 sec.
×2
×3
×1
NORMAL BASS CLEAR
HA-S90BN
–
+
ON
OFF
Bluetooth
Device
JVC HA-S90BN
7 sec.
ENGLISH
Thank you for purchasing this JVC product. Before you begin operating this unit, please read the operating instructions carefully to be sure you enjoy the best possible performance. If you have any
questions, please consult your JVC dealer.
To reduce the risk of electrical shocks, fire, etc.
• Do not disassemble or modify the unit.
• Do not allow flammable, water or metallic objects to enter the unit.
For your safety...
• In dryer air conditions such as in winter, you may feel some static shock when using the headphones.
• Should you start to feel ill while using the headphones, you should stop using them immediately.
• Be sure that your hair or any other objects do not get caught in the headband slider (adjuster) when
adjusting the headband.
NOTE
If the System does not work correctly, charge the System to reset it.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by JVCKENWOOD Corporation (JVC) is under license. Other trademarks and trade names are
those of their respective owners.
• The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other
countries.
CAUTION Specifications
BLUETOOTH
Standard BLUETOOTH v3.0 Class 2
Profiles A2DP/AVRCP/HSP/HFP
Frequency range 2.402 GHz - 2.480 GHz
Max. communication distance Approx. 10 m (33 ft)
Codecs SBC
Output power +4 dBm (MAX), Power Class 2
Power supply/General
Frequency response (when using
a wired connection)
8 Hz - 25 000 Hz
Power supply Internal rechargeable lithium battery
Battery life Approx. 16 hrs (NC+BT), Approx. 27 hrs (BT), Approx. 35 hrs (NC)
(Depends on usage conditions.)
Charging time Approx. 3.5 hrs
Usage temperature range 5 °C (41 °F) to 40 °C (104 °F)
Mass 195 g (6.88 oz) (including internal rechargeable battery)
Accessories Charging cable/ Audio cable (detachable cable)/ Carrying pouch
(S90BN only)
• Designs and specifications are subject to change without notice.
For HA-S90BN
Hold down
Hold down
CHARGING
When charging the headphones, be sure to use a USB to AC adapter with DC 5 V power output to avoid
malfunction or abnormal heat generation.
The indicator lights up in red, and charging starts. When charging is complete, the indicator goes out.
• When the remaining battery power is low, the alarm sounds every 4 minutes.
• Operation is not possible while charging.
CONNECTING
When the power is off, hold the POWER button down (for at least 7 seconds) until the indicator flashes
alternately in red and blue.
Select “JVC HA-S90BN” (“JVC HA-S70BT”) from the device list. The indicator flashes in blue when pairing is
complete.
• During the pairing process, the other device may require input of a PIN code. In such a case, enter “0000”
as the PIN code for the System.
ON and OFF
ON : The indicator lights up in blue for 1 second. The indicator flashes
slowly in blue when the unit is connected, and flashes slowly in red
when the unit is not connected.
OFF : The indicator lights up in red for 1 second.
• If no BLUETOOTH device is connected for about 5 minutes, the System
automatically turns itself off.
• When you turn on the unit for the first time after purchasing, the indicator
flashes alternately in red and blue and pairing begins automatically.
MUSIC
PHONE Using the System by connecting the supplied audio cable
• This unit cannot guarantee operation of all of the remote control functions depending on the device.
You can use the System as conventional headphones by connecting the supplied audio cable.
• Noise canceling is enabled. Other buttons and microphone are disabled.
Reject/
Switch between phone and headphones
Answer/
End
Noise canceling
• You can connect your smartphone to the System easily with NFC.
Using NFC, touch the N mark on the System with the smartphone.
Red/Blue Blue
ON/OFF
3 sec.
To Next Page
Loading...
Need help?
General
