To Next PageTo Next Page
Need help?Do you have a question about the JVC HR-J658E and is the answer not in the manual?
General warnings and guidelines to prevent fire and electric shock hazards.
Instructions for connecting the video recorder to a TV and power outlet.
Automatic setup process for channels, clock, and program numbers.
Easiest operation for playing recorded tapes on a TV.
Steps for recording TV signals onto a video tape.
Simplified timer programming using programme code numbers.
Entering the ShowView interface for programming.
Navigating to the program input screen.
Setting the desired start time for recording.
Setting the desired stop time for recording.
Setting the date for the scheduled recording.
Modifying the remote control to respond to B code signals.
Powering on the recorder after setting the remote control code.
Setting AV2 SELECT to DECODER for a decoder connection.
Physical connection of a decoder to the recorder.
Procedure for receiving scrambled broadcasts via a decoder.
Manually setting program numbers for SHOWVIEW timer recording.
Inputting the channel position where a broadcast is received.
Exiting SHOWVIEW setup to the normal display.
Navigating to the screen for setting the recorder's clock.
Manually adjusting the current date and time.
Solutions for power-related issues.
Solutions for problems with tape movement.
Solutions for issues during tape playback.
Solutions for problems encountered during recording.
Solutions for problems related to timer recordings.
Solutions for miscellaneous issues like audio or channel problems.
General
