February 8, 2003 4:06 pm Page 3
— 3 —
Master Page: Right
Front Panel
Rear Panel
Remote control
* PDC recording is not possible in Central and Eastern Europe.
On-screen display
If you press (OK
) on the remote control when “O.S.D.” is set to
“ON” (
墌
12), you can see the current recorder status on the
screen. To clear the on-screen display, press (OK
) again.
The indications are not recorded even if the recorder is in the
recording mode.
A Recorder operation mode
B Tape speed
C Tape direction
D Time counter
E Tape remaining time
F Audio mode
G Tape position*
* The position of “
q
” in relation to “0” (Beginning) or “+” (End) shows
the current position on the tape.
H VPS/PDC* indicator
* PDC recording is not possible in Central and Eastern Europe.
I Type of broadcast
J Current day/month/year
K Clock
L Channel and auxiliary input
M Cassette loaded mark
N S-VHS ET indicator
Buttons, Connectors and Indicators
Cassette loading slot
Display panel
Play indicator
Record
indicator
Timer mode indicator
Channel and
auxiliary input/
Clock time*
Infrared beam
receiving window
SAT# indicator
VCR indicator
* Each time you press ––:––, the display panel shows the channel
number and the clock time alternatively.
**The counter can display up to +/– “19:59:59”. If the playback or
recording time exceeds this limit the display starts to count from
“0:00:00”.
Pause 9 [SAT#]
Play 4
Record7
Rewind
3
Fast
Forward
5
Stop/Eject
0
PR+/–
Counter/Remain display**
S-VHS indicator
REVIEW indicator
Mains power cord
number keys
S-VHS ET : OFF
HR-S5960.5961_001EN.fm Page 3 Saturday, February 8, 2003 4:07 PM
To Next Page
Loading...
